Water heaters · Dallas and North Texas
Water Heater Repair
Most water heater calls come down to a few causes: no hot water, not enough hot water, a leak, or a strange noise. The fuel type and age decide what happens next.
Repair or replace?
InterNACHI puts the life of a conventional tank water heater at 6 to 12 years (InterNACHI). A tank near the end of that range that needs a major part is often a replacement job. A newer unit with a failed part, such as a thermostat, element, igniter or gas valve, is usually worth repairing.
Common faults by type
- Gas tank: pilot or igniter problems, a failing thermocouple or flame sensor, or a gas valve fault. See gas water heater repair and pilot light problems.
- Electric tank: a tripped breaker, a burned-out element or a bad thermostat. See electric water heater repair.
- Tankless: error codes, scale inside the heat exchanger, or flow that is too low to trigger the burner. See tankless water heater repair.
Popping, rumbling or ticking
Popping or rumbling from a tank usually means sediment has settled on the bottom and water trapped under it is boiling as the burner or element heats. Ticking can come from pipes expanding as hot water moves. A plumber can flush the tank and say whether the sediment has already shortened its life. Noise on its own is rarely urgent; noise plus water on the floor is a different call. See water heater leaking.
Permits in Dallas
Dallas Building Inspection says replacing a water heater needs a permit (Dallas Building Inspection). Ask the plumber whether your repair needs one.
Guides for your area: Dallas and 25 nearby towns.