Water lines · Dallas and North Texas
Low Water Pressure
Low pressure at one faucet is usually a clogged aerator or cartridge. Low pressure everywhere points to the pressure-reducing valve, a leak, the main valve, or the city supply.
Short answerCheck whether it is one fixture, hot only, or the whole house. Hot-only low pressure points to the water heater; whole-house low pressure points to the supply.
Narrow it down
- One faucet: a clogged aerator or a worn cartridge. See faucet repair.
- Hot water only: sediment in the water heater or a valve on the hot side.
- Whole house, sudden: a leak, a partly closed main valve, or a city main break nearby. See water main break.
- Whole house, gradual: a failing pressure-reducing valve, or older galvanized pipe narrowing inside.
Pressure-reducing valves
The International Plumbing Code requires a pressure-reducing valve where static water pressure is more than 80 psi (International Plumbing Code). These valves, usually near where the line enters the house, wear out and can fail toward low pressure or high pressure. A plumber can test the pressure with a gauge on a hose bib.
A leak can be the cause
A large leak in the yard or under the slab can drop pressure throughout the house. See leak detection.
Guides for your area: Dallas and 25 nearby towns.